|
|
|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有帐号?FreeOZ用户注册
x
Buying a used car – what to look for<br>
<br>
Unless you have a tame mechanic on hand we’d recommend you get your prospective car checked by your local motoring association before you buy. However , it would be too expensive to get them to inspect every car you want to look at, so you’ll have to do basic inspections yourself. Make sure they’re done your satisfaction. Don’t let the seller take you around the car just pointing out the good thing.<br>
An inspection should be done in good light, preferably daylight so you don’t miss anything. Start outside the car, work your way in and then give it a test drive. The national roads and motorists Association recommends you check the following points.<br>
<br>
1. Inspect at the body panels for signs of or accident damage. look for paint bubbles , paint that doesn’t match or panels that don’t seem to fit properly . if you think body filler may have been used on the panels, a fridge magnet is a good way to test it out .<br>
<br>
<br>
<br>
2. Kicking tyres won’t tell you anything , but you should check them for signs of wear on the tread , particularly uneven wear. Which indicates a problem with the steering or suspension. While you’re down there look on the ground beneath the car for any signs of oil leaks<br>
3. Look under the mats in the boot for signs of rust. Check the toolkit and jack are in place and have a look at the tread on the spare tyre while you have the boot open. Make sure the boot closes firmly.<br>
4. Make sure all the doors and windows open and close properly as well. check under the carpets in the car for rust. Make sure the seatbelts are in good condition and the seats are well anchored and comfortable enough.<br>
5. Open the bonnet and look at the condition of the engine and the battery. If they’re very dirty. It’s a sign the car has been poorly maintained. Of course if they’re spotless, it’s a sign the engine’s just been cleaned and doesn’t tell you anything.<br>
6. Take the radiator cap off and look at the colour of the coolant; it should be clean and brightly coloured. Look at the dipstick. If the oil’s a grey or milky colour. This indicates a serious problem.<br>
7. The compliance plate is usually on the firewall. It will tell you the date of manufacture and the chassis number of the car. Check these match what’s written on the registration papers. Check the engine number corresponds as well.<br>
8. Leave the bonnet up and start the engine , Take another walk around the car. Look for smoky exhaust (blue or white smoke signifies a serious problem) and any leaks from the engine, Listen to the engine. The sound should be even. With no unusual noises.<br>
9. Take it for a drive on quiet road so you can put it through its paces without worrying about other traffic. Try out all the accessories (air conditioning, horn, lights radio, windscreen wipers, etc) at some time during the test drive. Keep an eye out for any warming lights on the dashboard (oil pressure, charging system, etc) as well.<br>
10. Try out the brakes a number of times in succession. Make sure they feel firm and don’t pull to one side. Relax your grip on the steering and see if the car pulls to one side or not, Listen for any unusual noises, particularly when you drive over bumps.<br>
|
|